Branch of engineering
Pneumatics
(from Greek
πνε?μα
pneuma
'wind, breath') is a branch of
engineering
that makes use of gas or
pressurized air
.
Pneumatic systems used in
industry
are commonly powered by
compressed air
or compressed
inert gases
. A centrally located and electrically-powered
compressor
powers
cylinders
,
air motors
,
pneumatic actuators
, and other
pneumatic
devices. A pneumatic system controlled through manual or automatic
solenoid valves
is selected when it provides a lower cost, more flexible, or safer alternative to
electric motors
, and
hydraulic actuators
.
Pneumatics also has applications in
dentistry
,
construction
,
mining
, and other areas.
Gases used in pneumatic systems
[
edit
]
Pneumatic systems in fixed installations, such as factories, use compressed air because a sustainable supply can be made by compressing
atmospheric air
. The air usually has moisture removed, and a small quantity of oil is added at the compressor to prevent corrosion and lubricate mechanical components.
Factory-plumbed pneumatic-power users need not worry about poisonous leakage, as the gas is usually just air. Any compressed gas other than air is an asphyxiation hazard?including nitrogen, which makes up 78% of air. Compressed
oxygen
(approx. 21% of air) would not asphyxiate, but is not used in pneumatically-powered devices because it is a fire hazard, more expensive, and offers no performance advantage over air. Smaller or stand-alone systems can use other compressed gases that present an asphyxiation hazard, such as nitrogen?often referred to as OFN (oxygen-free nitrogen) when supplied in cylinders.
Portable pneumatic tools and small vehicles, such as
Robot Wars
machines and other hobbyist applications are often powered by compressed
carbon dioxide
, because containers designed to hold it such as
soda stream
canisters and fire extinguishers are readily available, and the
phase change
between liquid and gas makes it possible to obtain a larger volume of compressed gas from a lighter container than compressed air requires. Carbon dioxide is an asphyxiant and can be a freezing hazard if vented improperly.
History
[
edit
]
Although the early history of pneumatics is murky, the field's founder is traditionally traced back to
Ctesibius of Alexandria
"who worked in the early 3rd century BCE and invented a number of mechanical toys operated by air, water, and steam under pressure." Though no documents written by Ctesibius survive, he is thought to have heavily influenced
Philo of Byzantium
while writing his work,
Mechanical Syntaxis
, as well as
Vitruvius
in
De architectura
.
[1]
In the first century BC, the ancient Greek mathematician
Hero of Alexandria
compiled recipes for dozens of contraptions in his work, Pneumatics. It has been speculated that much of this work can be attributed to Ctesibius.
[2]
The pneumatic experiments described in these ancient documents later inspired the Renaissance inventors of the
thermoscope
and the
air thermometer
, devices which relied upon the heating and cooling of air to move a column of water up and down a tube.
[3]
: 4?5
German physicist
Otto von Guericke
(1602-1686) invented the vacuum pump, a device that can draw out air or gas from the attached vessel. He demonstrated the vacuum pump to separate the pairs of copper hemispheres using air pressures. The field of pneumatics has changed considerably over the years. It has moved from small handheld devices to large machines with multiple parts that serve different functions.
Comparison to hydraulics
[
edit
]
Both pneumatics and
hydraulics
are applications of
fluid power
. Pneumatics uses an easily compressible gas such as air or a suitable pure gas?while hydraulics uses relatively incompressible liquid media such as oil. Most industrial pneumatic applications use pressures of about 80 to 100
pounds per square inch
(550 to 690
kPa
). Hydraulics applications commonly use from 1,000 to 5,000 psi (6.9 to 34.5 MPa), but specialized applications may exceed 10,000 psi (69 MPa).
[
citation needed
]
Advantages of pneumatics
[
edit
]
- Simplicity of design and control
?Machines are easily designed using standard cylinders and other components, and operate via simple on-off control.
- Reliability
?Pneumatic systems generally have long operating lives and require little maintenance. Because gas is compressible, equipment is less subject to shock damage. Gas absorbs excessive force, whereas fluid in hydraulics directly transfers force. Compressed gas can be stored, so machines still run for a while if electrical power is lost.
- Safety
?There is a very low chance of fire compared to hydraulic oil. New machines are usually overload safe to a certain limit.
Advantages of hydraulics
[
edit
]
- Fluid does not absorb any of the supplied energy.
- Capable of moving much higher loads and providing much lower forces due to the incompressibility.
- The hydraulic working fluid is practically incompressible, leading to a minimum of
spring
action. When
hydraulic fluid
flow is stopped, the slightest motion of the load releases the pressure on the load; there is no need to "bleed off" pressurized air to release the pressure on the load.
- Highly responsive compared to pneumatics.
- Supply more power than pneumatics.
- Can also do many purposes at one time: lubrication, cooling and power transmission.
Pneumatic logic
[
edit
]
Pneumatic logic systems (sometimes called
air logic control
) are sometimes used for controlling industrial processes, consisting of primary logic units like:
- And
units
- Or
units
- Relay or booster units
- Latching units
- Timer units
- Fluidics
amplifiers with no moving parts other than the air itself
Pneumatic logic is a reliable and functional control method for industrial processes. In recent years, these systems have largely been replaced by electronic control systems in new installations because of the smaller size, lower cost, greater precision, and more powerful features of digital controls. Pneumatic devices are still used where upgrade cost, or safety factors dominate.
[4]
Examples of pneumatic systems and components
[
edit
]
See also
[
edit
]
Notes
[
edit
]
References
[
edit
]
- Brian S. Elliott,
Compressed Air Operations Manual
, McGraw Hill Book Company, 2006,
ISBN
0-07-147526-5
.
- Heeresh Mistry,
Fundamentals of Pneumatic Engineering
, Create Space e-Publication, 2013,
ISBN
1-49-372758-3
.
External links
[
edit
]
Look up
pneumatics
in Wiktionary, the free dictionary.
|
---|
Types
| |
---|
Manufacturers
| |
---|
Other aspects
| |
---|
Related topics
| |
---|