In these small buildings the ancient materials of timber and masonry are still predominant in the structural systems. In
North America
, which has
abundant
softwood forests, light timber frames descended from the 19th-century balloon frame are widely used. These present-day
“platform” frames
are made of standard-dimension timbers, usually two or four centimetres (0.75 or 1.5 inch) thick, which are joined together by machine-made nails and other metal fasteners using hand tools.
The first step is to construct a
floor
, which rests on the foundation wall. A heavy timber sill is attached to the wall with anchor bolts, and on top of it are nailed the floor
joists
, typically 4 × 28 centimetres (1.5 × 11.25 inches) and spaced 40 centimetres (16 inches) apart. The span of the floor joists is usually about 3.6 metres (12 feet), which is the common maximum length of available timbers. The floor may need intermediate supports in the form of interior foundation walls or, if there is a basement, intermediate
beams
of wood or steel supported by the foundation walls and columns. For longer spans, floor trusses can be made, with members joined by nail grids or nailed plywood gussets or with wood chords and diagonal metal web members. On top of the joists is nailed plywood subflooring, which forms the deck and gives lateral stability to the floor plane.
The exterior bearing
walls
are made of 4 × 9-centimetre (1.5 × 3.5-inch; “2 × 4”) timber verticals, or
studs
, spaced 40 or 60 centimetres (16 or 24 inches) apart, which rest on a horizontal timber, or plate, nailed to the floor
platform
and support a double plate at the top. The walls are sheathed on the outside with panels of
plywood
or
particleboard
to provide a surface to attach the exterior
cladding
and for
lateral
stability against wind. Plywood and particleboard are fabricated in panels of standard sizes. Plywood is made of thin layers of wood, rotary-cut from logs and glued together with the wood grain running perpendicularly in adjoining layers. Particleboard consists of fine wood chips mixed together in an
adhesive
matrix and allowed to harden under pressure. On top of the wall plate is placed either a second floor or the
roof
.
Since most of the roofing materials used in these buildings are not fully watertight, the roofs must have sloped surfaces to rapidly drain off rainwater. Sloped forms are created by two methods. The traditional method uses joists similar to those of floor construction to span between exterior walls. Rafters are nailed to the ends of each
joist
and the rafters meet at a central ridge member, forming a triangular attic space. Where no attic space is needed, it has proved more economical to span the roof with triangular
trusses
with interior web members. These roof trusses are usually made of narrow timbers joined by nails, glue, or metal connectors, and they are often prefabricated in a
workshop
. Plywood or particleboard sheathing is then nailed to the roof surfaces to receive the roofing and to provide lateral stability, making the entire frame into a rigid box.
Light timber frames are quite flammable, but small one- or two-story buildings are easy to evacuate in case of a
fire
, and building codes permit the use of these frames with such features as fire-resistant gypsum board on the interiors and fire-stops (short wooden members) between the studs. Timber structures are attacked by certain species of insects?such as termites and carpenter ants?as well as certain fungi, particularly in warm, moist climates. Wood can be chemically treated to discourage these attacks; other precautions include raising the timber above the ground and keeping it dry.
Masonry walls
Structural
masonry
walls are also used in this building type, primarily in multistory buildings, where they offer greater
load-bearing
capacity
and fire resistance.
Brick
and concrete
block
are the major materials, brick being favoured for exterior surfaces because of its appearance and durability. Solid brick walls are rarely used, due to the higher labour and material costs; composite walls of brick and block or block alone are common.
Cavity walls
are used in colder climates; in these, two wythes (vertical layers) of masonry are built on either side of a layer of rigid insulation. The wythes are joined together by steel reinforcement that runs through the insulation and is laid in the horizontal masonry joints at intervals. Cavity walls have a heat-flow rate that is 50 percent of that of a solid wall. Timber floor and roof construction, similar to
balloon framing
, is used with masonry construction; and there is also some use of precast prestressed hollow concrete panels, which are fireproof and can span up to nine metres (30 feet).